The HD-26 Clever Lever® puts science back in this chore by providing just the right tool to remove and replace tires easily and safely. The Clever Lever® allows one person to readily move tires up to 300 lbs., helping to prevent back injuries and other costly insurance claims. Simply roll the Clever Lever® under the tire, then lift and pull. To replace a tire, simply push it back in, rotate and tilt for quick alignment with the studs. The HD-26 Clever Lever fits tires from 36″ to 48″. The Clever Lever® comes in two models that fit everything from light/medium duty pickups to heavy-duty tractors and trailers.
The CH-22 Manual Tire Changer makes the job easy, fast and economical! No other manual changer works as well as the CH-22. Everything you need to change small tires comes with the CH-22 Manual Tire Changer. The CH-22 accommodates most wheels including open hub and bearing wheels. Also included is the patented CH-4 Mongoose Tire Tool! Don’t turn away any more small tire and wheel business add new business, new customers and more profit today!
Designed for Lawn & Garden and Motor Sport Wheels
The Amermac 525 Low Profile Spinner allows for easy access under lower body style cars and trucks. Completely portable this heavy duty spinner will handle passenger cars all the way upto heavy duty truck applications, including rear wheels and drive duals. The 525 Low Profile Spinner is available in 5 HP, 220V, Single Phase.
The CH-4 M Mini Mongoose Kit is a smaller version of the standard Mongoose tire tool. This precise smaller version allows for easy mounting and demounting of smaller tube type and tubeless tires such as a 4″ rim diameter wheel. Also included in th kit is a smaller center post for use on the CH-22 Manual Tire Changer. The smaller center post allows you to mount and dismount small bearing type wheels without actually having to clamp them into the jaws of the CH-22.
The VV 3000 Versa Vac™ Radiator Pressure Tester and Coolant Dam will pay for itself after just a few uses. Ingenious and simple, this new time saving tool holds the engine coolant in, even when pipe plugs, sensors or valves are removed for replacement or repair. The Versa-Vac™ Pressure Tester creates a vacuum, holding coolant in with little or no loss. For many minor repairs, there is no need to spend valuable shop time draining and refilling the system. The Versa-Vac™ unit fits standard radiator necks and installs as quickly as a radiator cap. Adapters are available to fit special applications. As a pressure tester, the Versa-Vac™ allows a quick check of your repair with positive pressure from shop air. No tedious hand pumping. A radiator cap installs on the tester to provide pressure relief. An inlet ball valve adjusts the pressure applied to the system up to the maximum limit of the relief valve.
Air requirement for continuous use: approximately 30 CFM at 120-150 PSI.
*** ADAPTERS REQUIRED AND SOLD SEPARATELY ***
Cut inflation time by half when inflating a tire with the core retracted. The CRT-100 Core Retracting Tool is designed to reduce inflation/deflation time by allowing the operator to remove the valve core safely during the process. Using the CRT-100 eliminates the risk of eye injuries from “flying” valve cores. The operation is simple. After removing the valve cap, the CRT-100 is first clipped onto the valve stem. The CRT-100 stem is then pushed in to engage the valve core. By rotating the stem counter-clockwise, the valve core can be removed without the risk of the extracted core escaping. The valve core is extracted into the CRT-100 body and held there during inflation or deflation process. The clear CRT-100 body allows the operator to view that the valve core is fully retracted. Upon completion of the inflation/deflation process, the valve core can be refitted into the valve stem by pushing the CRT-100 stem forward and rotating it clockwise.
Copyright © 2019 Big Red Trading Post. All Rights Reserved.