Product Details
Free Shipping!
09.410 Expanding Rim 14″ – 17″ x 7 1/8″
$1,727.88
14″ – 17″ x 7 1/8″ Expanding Rim
Description
14″ – 17″ x 7 1/8″ Expanding Rim
Additional information
| Weight | 40 oz |
|---|
Email: info@bigredtradingpost.com
Related Products
08.410 Expanding Rim (REBUILT) 13″ – 16″ x 6 3/8″
08.410 Expanding Rim (REBUILT) 13″ – 16″ x 6 3/8″CLOSE OUT
ONLY AVAILABLE AS REFURBISHED UNIT
13″ – 16″ X 6 3/8″ EXP RIM
Stripper Ring Lathe
Stripper Ring LatheThe Amermac Model 1100 Stripper Ring Lathe has the solution for Precision and Economics in Stripper Ring Turning for the steel industry. The Lathe was designed to take the grind out of the ring turning.
• Easy to use; grinding can be done in 15 minutes.
• Avoids knife mark claims.
• Compact design; Model 1100 can be used in area 5’ x 5’
• No special ventilation needed; Model 1100 doesn’t produce any smell or dust.
• Assembled and ready to use just plug it into a 110v – 115v outlet.
Speedy Dayton Wheel Adapter
Speedy Dayton Wheel AdapterThe 689900 Speedy Dayton Wheel Adapter allows easy mounting of 20” – 22.5” rims, cutting balancing time in half for most applications. This unit works for all models of truck computer wheel balancers. This unit doubles your production of demountable rim balancing. Lightweight and sturdy! Manufactured form heat-treated aluminum. Easy to mount! It mounts straight literally the first time. The Speedy works great on duplex rims (18″ x 22.5″ tires) for steering axles.
Core Retracting Tool
Core Retracting ToolCut inflation time by half when inflating a tire with the core retracted. The CRT-100 Core Retracting Tool is designed to reduce inflation/deflation time by allowing the operator to remove the valve core safely during the process. Using the CRT-100 eliminates the risk of eye injuries from “flying” valve cores. The operation is simple. After removing the valve cap, the CRT-100 is first clipped onto the valve stem. The CRT-100 stem is then pushed in to engage the valve core. By rotating the stem counter-clockwise, the valve core can be removed without the risk of the extracted core escaping. The valve core is extracted into the CRT-100 body and held there during inflation or deflation process. The clear CRT-100 body allows the operator to view that the valve core is fully retracted. Upon completion of the inflation/deflation process, the valve core can be refitted into the valve stem by pushing the CRT-100 stem forward and rotating it clockwise.
VV3000 Versa Vac
VV3000 Versa VacThe VV 3000 Versa Vac™ Radiator Pressure Tester and Coolant Dam will pay for itself after just a few uses. Ingenious and simple, this new time saving tool holds the engine coolant in, even when pipe plugs, sensors or valves are removed for replacement or repair. The Versa-Vac™ Pressure Tester creates a vacuum, holding coolant in with little or no loss. For many minor repairs, there is no need to spend valuable shop time draining and refilling the system. The Versa-Vac™ unit fits standard radiator necks and installs as quickly as a radiator cap. Adapters are available to fit special applications. As a pressure tester, the Versa-Vac™ allows a quick check of your repair with positive pressure from shop air. No tedious hand pumping. A radiator cap installs on the tester to provide pressure relief. An inlet ball valve adjusts the pressure applied to the system up to the maximum limit of the relief valve.
Air requirement for continuous use: approximately 30 CFM at 120-150 PSI.
*** ADAPTERS REQUIRED AND SOLD SEPARATELY ***
Complete Pakpress® Kit
Complete Pakpress® KitThe 6346 Complete PakPress® Kit is a must if you’re in the Fleet Maintenance industry. Don’t be without this tool that brings the power of a 10-ton shop press right to the truck. Most impressive, the PakPress® lets you remove and install studs without removing the hub. A two-hour job is done in twenty minutes, with no risk of damaging seals or bearings.
The 6346 Complete PakPress® Kit includes:
- 1-PPK PakPress®
- 6247 PakPress® Cart
- Adapters ( 6261,6235, 6236, 6361)
Mini Mongoose Kit
Mini Mongoose KitThe CH-4 M Mini Mongoose Kit is a smaller version of the standard Mongoose tire tool. This precise smaller version allows for easy mounting and demounting of smaller tube type and tubeless tires such as a 4″ rim diameter wheel. Also included in th kit is a smaller center post for use on the CH-22 Manual Tire Changer. The smaller center post allows you to mount and dismount small bearing type wheels without actually having to clamp them into the jaws of the CH-22.
PakPress® Frame
PakPress® FrameReplacement frame with cylinder and adapters
(does not include hoses or pump)
S-24 Tire Cart
S-24 Tire CartThe S-24 Tire Cart is perfect for quick and safe around the shop transport of most passenger and light truck tire & wheel. The heavy duty casters allow for easy lifting and maneuverability. Mounting a tire is simple and fast. Inner rollers on the S-24 Tire Cart allow the tire & wheel to spin freely, for fast and easy wheel stud alignment. Completely adjustable the S-24 handles just about any size tire and wheel combination up to 200 lbs. Stop moving heavy tires the hard way and reduce your risk of injury by using the S-24 Tire Cart.
We are a team of designers and developers that create high quality WordPress, Magento, Prestashop, Opencart themes.
Payment:
