The HD-26 Clever Lever® puts science back in this chore by providing just the right tool to remove and replace tires easily and safely. The Clever Lever® allows one person to readily move tires up to 300 lbs., helping to prevent back injuries and other costly insurance claims. Simply roll the Clever Lever® under the tire, then lift and pull. To replace a tire, simply push it back in, rotate and tilt for quick alignment with the studs. The HD-26 Clever Lever fits tires from 36″ to 48″. The Clever Lever® comes in two models that fit everything from light/medium duty pickups to heavy-duty tractors and trailers.
The DG-20 Digital Tire Inflator represents one of the most accurate and easy to use digital tire inflators on the market today. Featuring a large, clear & easy to read digital display, with a back light feature, the DG-20 is designed and built for the toughest shop environments. The durable LCD display is protected by a large full body rubber shock boot which is included. The DG-20 is programmable to display in four units: PSI, BAR, KGF and KPA. The DG-20 services inflation ranges from 0-175 PSI with an accuracy of +/- 1% full scale. A simple inflate and/or deflate control allows for precise inflation control by the user. The DG-20 comes equipped with a 72” inflation hose assembly with a locking straight chuck.
The Amermac Model 1100 Stripper Ring Lathe has the solution for Precision and Economics in Stripper Ring Turning for the steel industry. The Lathe was designed to take the grind out of the ring turning.
• Easy to use; grinding can be done in 15 minutes.
• Avoids knife mark claims.
• Compact design; Model 1100 can be used in area 5’ x 5’
• No special ventilation needed; Model 1100 doesn’t produce any smell or dust.
• Assembled and ready to use just plug it into a 110v – 115v outlet.
The 6346 Complete PakPress® Kit is a must if you’re in the Fleet Maintenance industry. Don’t be without this tool that brings the power of a 10-ton shop press right to the truck. Most impressive, the PakPress® lets you remove and install studs without removing the hub. A two-hour job is done in twenty minutes, with no risk of damaging seals or bearings.
The 6346 Complete PakPress® Kit includes:
The 350B Back Buddy II™ will make brake jobs easier and more profitable. This versatile tool was designed to prevent injuries from awkward lifting and keep workers’ comp rates down. The Back Buddy II™ rolls under and bolts onto heavy drum and hub assembly, then handily rolls the assembly out and lays it over for servicing. Re-assembly is quick and precise because the Back Buddy II™ angles for perfect hub alignment, eliminating seal damage and costly fixes. The Back Buddy II™ handles all hub and drum assemblies with Universal Receiver and Adapter Sets. A simple change of adapters transforms the tool in seconds from inboard to outboard application.
*Adapters 6069 and 6073 10-hole inboard and outboard application are included
*Other wheel adapters sold separately.
Cut inflation time by half when inflating a tire with the core retracted. The CRT-100 Core Retracting Tool is designed to reduce inflation/deflation time by allowing the operator to remove the valve core safely during the process. Using the CRT-100 eliminates the risk of eye injuries from “flying” valve cores. The operation is simple. After removing the valve cap, the CRT-100 is first clipped onto the valve stem. The CRT-100 stem is then pushed in to engage the valve core. By rotating the stem counter-clockwise, the valve core can be removed without the risk of the extracted core escaping. The valve core is extracted into the CRT-100 body and held there during inflation or deflation process. The clear CRT-100 body allows the operator to view that the valve core is fully retracted. Upon completion of the inflation/deflation process, the valve core can be refitted into the valve stem by pushing the CRT-100 stem forward and rotating it clockwise.
Copyright © 2019 Big Red Trading Post. All Rights Reserved.