The innovative SC-99 Striver Tool™ seal and bushing driver makes S-camshaft maintenance quick and easy. Now there is no need to remove the hub in order to extract the S-camshaft. Installation of the new bushing and seal is simple and precise. The Striver Tool™ seal and bushing driver eliminates the risk of seal damage. The technician simply taps his hammer on the Striver Tool™ not the seal, when installing the new seal and bushings.
The 689900 Speedy Dayton Wheel Adapter allows easy mounting of 20” – 22.5” rims, cutting balancing time in half for most applications. This unit works for all models of truck computer wheel balancers. This unit doubles your production of demountable rim balancing. Lightweight and sturdy! Manufactured form heat-treated aluminum. Easy to mount! It mounts straight literally the first time. The Speedy works great on duplex rims (18″ x 22.5″ tires) for steering axles.
The TC-50 Tire Cutter is designed to cut passenger and light truck tires into 4 pieces at a rate of up to 60 tires per hour. The TC-50 is equipped with a 10 HP B&S commercial gas engine. The TC-50 Tire Cutter is perfect for tire shops who want to handle their own tire disposal. The patented shear blades works on a zero clearance design for a clean cut. This greatly extends the blade life compared to other designs. Two-handle valve system keeps operator’s hand away from the blades while cutting for added safety. The TC-50 Tire Cutter is easy to operate, low maintenance, dependable and designed for years of service. Small foot print allows this tire cutter to easily fit in any work area
The 6346 Complete PakPress® Kit is a must if you’re in the Fleet Maintenance industry. Don’t be without this tool that brings the power of a 10-ton shop press right to the truck. Most impressive, the PakPress® lets you remove and install studs without removing the hub. A two-hour job is done in twenty minutes, with no risk of damaging seals or bearings.
The 6346 Complete PakPress® Kit includes:
The Amermac 525 Low Profile Spinner allows for easy access under lower body style cars and trucks. Completely portable this heavy duty spinner will handle passenger cars all the way upto heavy duty truck applications, including rear wheels and drive duals. The 525 Low Profile Spinner is available in 5 HP, 220V, Single Phase.
The HD-26 Clever Lever® puts science back in this chore by providing just the right tool to remove and replace tires easily and safely. The Clever Lever® allows one person to readily move tires up to 300 lbs., helping to prevent back injuries and other costly insurance claims. Simply roll the Clever Lever® under the tire, then lift and pull. To replace a tire, simply push it back in, rotate and tilt for quick alignment with the studs. The HD-26 Clever Lever fits tires from 36″ to 48″. The Clever Lever® comes in two models that fit everything from light/medium duty pickups to heavy-duty tractors and trailers.
The VV 3000 Versa Vac™ Radiator Pressure Tester and Coolant Dam will pay for itself after just a few uses. Ingenious and simple, this new time saving tool holds the engine coolant in, even when pipe plugs, sensors or valves are removed for replacement or repair. The Versa-Vac™ Pressure Tester creates a vacuum, holding coolant in with little or no loss. For many minor repairs, there is no need to spend valuable shop time draining and refilling the system. The Versa-Vac™ unit fits standard radiator necks and installs as quickly as a radiator cap. Adapters are available to fit special applications. As a pressure tester, the Versa-Vac™ allows a quick check of your repair with positive pressure from shop air. No tedious hand pumping. A radiator cap installs on the tester to provide pressure relief. An inlet ball valve adjusts the pressure applied to the system up to the maximum limit of the relief valve.
Air requirement for continuous use: approximately 30 CFM at 120-150 PSI.
*** ADAPTERS REQUIRED AND SOLD SEPARATELY ***
Copyright © 2019 Big Red Trading Post. All Rights Reserved.