The S-1400M Truck Frame Lift air jack is engineered just like its little brother, the S-1400 except it has a 60″ between the air cylinder and lift pads allows you to reach further under a frame, the safest way! Anywhere an air hose can reach you have a low cost lifting system with one man portability. The two large center wheels provide easy maneuverability for quick positioning. Trigger the dual action valve to raise or lower up to 7 tons of equipment.
Maximum lift height 44″
Minimum height 11.5″
Max width between saddles is 60″
The Cheetah® Magnum II Barrel is designed to increase the impact power of the CH-10 Cheetah® Bead Seater and CH-10AL Cheetah® Bead Seater by 2 to 3 times over the standard barrel. The Cheetah® Magnum II Barrel spreads the air dispersion over a greater area and provides optimum tire bead seating. The Cheetah® Magnum II Barrel is easy to install and installs in minutes.
The BS-07 Cheetah® Bead Seater makes seating the most difficult bead not only safe but simple, fast and economical. The BS-07 Cheetah® Bead Seater has an “End of Tank” discharge design, flared discharge barrel and a 2” discharge valve for maximum bead seating power. The BS-07 has a 5 Gallon capacity ASME certified steel tank.
Protect your Cheetah® Bead Seater and Cheetah® accessory investments. The TI-87 Cheetah® Storage rack is designed to be installed on a rack or wall to store your BS-07, CH-5(AL), CH-10(AL)and CH-13AL Cheetah®Bead Seaters and accessories. The TI-87 will hold your Cheetah® Bead Seater, Air Hose Assembly, Universal Stand, Magnum Barrels and straight barrels up off the floor in one convenient location. The TI-87 will keep your shop clean, organized and safe!
The CH-10AL Cheetah® Bead Seater will seat the bead on all truck and small tractor tires. A 2″ tank opening allows use of the optional Magnum II barrel giving added “spread” of the discharge. This extends the power of the CH-10AL for seating even the most difficult beads on larger diameter wheels. The CH-10AL Cheetah® Bead Seater has a 10 gallon light- weight ASME certified aluminum tank.
The CH-03 Cheetah® Safety Cage Bead Seater simply bolts to a tire safety cage using the fully adjustable brackets. The CH-03 seats the bead on difficult tires located in the safety cage (not included) faster and safer than any other system on the market. The CH-03 is universal and can accommodate virtually any size tire that is normally inflated in a safety cage.
6′ x 1 1/2″ inflation hose
*Does not include the safety cage or discharge tank
The 5591 Oil Filter Crusher Stand is an optional stand designed for use when wall mounting of the TC-6 Oil Filter Crusher is not available. The 5591 stand will allow the the placement of standard 30 gallon or 55 gallon drum under the TC-6 Oil Filter Crusher.
The Cheetah® Tire Stand is designed to elevate the wheel when seating the bead. Elevating the wheel by using the Cheetah® Tire Stand helps to ensure positive seating of the bottom tire bead. The Cheetah® Tire Stand legs are equipped with rubber strips to protect wheels from damage.
The Cheetah® Magnum I Barrel is designed to increase the impact power of the CH-5 Cheetah® Bead Seater by 2 to 3 times over the standard barrel. The Cheetah® Magnum I Bar spreads the air discharge over a larger area to provide optimum air dispersion. The Cheetah® Magnum I Barrel is easy to install and installs in only minutes.
Copyright © 2019 Big Red Trading Post. All Rights Reserved.