The innovative SC-99 Striver Tool™ seal and bushing driver makes S-camshaft maintenance quick and easy. Now there is no need to remove the hub in order to extract the S-camshaft. Installation of the new bushing and seal is simple and precise. The Striver Tool™ seal and bushing driver eliminates the risk of seal damage. The technician simply taps his hammer on the Striver Tool™ not the seal, when installing the new seal and bushings.
Cut inflation time by half when inflating a tire with the core retracted. The CRT-100 Core Retracting Tool is designed to reduce inflation/deflation time by allowing the operator to remove the valve core safely during the process. Using the CRT-100 eliminates the risk of eye injuries from “flying” valve cores. The operation is simple. After removing the valve cap, the CRT-100 is first clipped onto the valve stem. The CRT-100 stem is then pushed in to engage the valve core. By rotating the stem counter-clockwise, the valve core can be removed without the risk of the extracted core escaping. The valve core is extracted into the CRT-100 body and held there during inflation or deflation process. The clear CRT-100 body allows the operator to view that the valve core is fully retracted. Upon completion of the inflation/deflation process, the valve core can be refitted into the valve stem by pushing the CRT-100 stem forward and rotating it clockwise.
The Amermac Model 1100 Stripper Ring Lathe has the solution for Precision and Economics in Stripper Ring Turning for the steel industry. The Lathe was designed to take the grind out of the ring turning.
• Easy to use; grinding can be done in 15 minutes.
• Avoids knife mark claims.
• Compact design; Model 1100 can be used in area 5’ x 5’
• No special ventilation needed; Model 1100 doesn’t produce any smell or dust.
• Assembled and ready to use just plug it into a 110v – 115v outlet.
The VV 3000 Versa Vac™ Radiator Pressure Tester and Coolant Dam will pay for itself after just a few uses. Ingenious and simple, this new time saving tool holds the engine coolant in, even when pipe plugs, sensors or valves are removed for replacement or repair. The Versa-Vac™ Pressure Tester creates a vacuum, holding coolant in with little or no loss. For many minor repairs, there is no need to spend valuable shop time draining and refilling the system. The Versa-Vac™ unit fits standard radiator necks and installs as quickly as a radiator cap. Adapters are available to fit special applications. As a pressure tester, the Versa-Vac™ allows a quick check of your repair with positive pressure from shop air. No tedious hand pumping. A radiator cap installs on the tester to provide pressure relief. An inlet ball valve adjusts the pressure applied to the system up to the maximum limit of the relief valve.
Air requirement for continuous use: approximately 30 CFM at 120-150 PSI.
*** ADAPTERS REQUIRED AND SOLD SEPARATELY ***
The CH-4 M Mini Mongoose Kit is a smaller version of the standard Mongoose tire tool. This precise smaller version allows for easy mounting and demounting of smaller tube type and tubeless tires such as a 4″ rim diameter wheel. Also included in th kit is a smaller center post for use on the CH-22 Manual Tire Changer. The smaller center post allows you to mount and dismount small bearing type wheels without actually having to clamp them into the jaws of the CH-22.
Copyright © 2019 Big Red Trading Post. All Rights Reserved.