CH-10AL Cheetah® Bead Seater – Aluminum

*Please note we recommend the use of a good quality inline filter to remove contaminants and moisture.

The CH-13AL Cheetah® Magnum Bead Seater is the most effective way to seat the beads on wheel sizes 24″ to 54″. Used properly the CH-13AL Cheetah® Bead Seater will seat the bead on virtually all tractor and heavy equipment tires. The CH-13AL works on both vertical and horizontal applications and can be used in the field where the tires remain mounted to the equipment. Made with a 13 gallon ASME certified aluminum tank the CH-13AL Cheetah® Bead Seater has a 50% weight savings when compared to a traditional steel tank.

The CH-10 Cheetah® Bead Seater will seat the bead on all truck and small tractor tires. A 2″ tank opening allows use of the optional Magnum II barrel giving added “spread” of the discharge. This extends the power of the CH-10 for seating even the most difficult beads on larger diameter wheels.  The CH-10 Cheetah® Bead Seater has a 10 gallon ASME certified steel tank.

The CH-60C Cheetah® Bead Seater is designed to be used to seat the bead on large tubeless tractor and off highway tires. The CH-60C can seat the bead on large tires in either vertical or horizontal position.  The dual discharge barrels can be easily adjusted to handle 24″ to 54″ wheel diameters. The adjustable discharge barrels are able to fit over the wheel weights on rear farm tractor tires. Farm tires can be mounted while the wheel and tire assembly are mounted to the tractor. The CH-60C Cheetah® Bead Seater includes a 60 gallon storage tank, adjustable dual discharge barrels, wheel stand, whip hose and discharge hose.

CH-60 Cheetah® 60 gallon tank only

The CHR-1 Cheetah® Safety-Flate was developed for fleet service application. The CHR-1 eliminates guesswork by using a 3/8″ high volume, high flow regulator which quickly and accurately inflates up to four tires at the same time. The pre-set inflation gauge and regulator assembly maintain safety and precision. The CHR-1 is equipped with special couplers and (4) 25′ hoses. Constructed of high strength steel, yet lightweight and compact, the CHR-1  is built for heavy shop use and years of dependable service.