The HH-419 Bead Breaker allows for easy tire bead breaking in the field or shop. The HH-419 Bead Breaker is designed for use on all alloys, steel, painted or polished wheels and will not damage or scratch wheels when used properly. Completely adjustable the HH-419 Bead breaker will work on all wheels with diameters of 4″ to 19.5″ including both safety and split type wheels. Excellent for use on 4X4’s, trucks, cars, ATV’s, garden equipment and trailers. These units are built to withstand continuous use in difficult conditions and are unaffected by sand, mud, moisture or freezing temperatures.
For wheels with diameters of 20″ to 28″ the HH-419-E extension is required and sold separately.
The S-1400M Truck Frame Lift air jack is engineered just like its little brother, the S-1400 except it has a 60″ between the air cylinder and lift pads allows you to reach further under a frame, the safest way! Anywhere an air hose can reach you have a low cost lifting system with one man portability. The two large center wheels provide easy maneuverability for quick positioning. Trigger the dual action valve to raise or lower up to 7 tons of equipment.
Maximum lift height 44″
Minimum height 11.5″
Max width between saddles is 60″
The HH-419E Bead Breaker Extension is an option for the HH-419 Bead Breaker. The HH-419E Bead Breaker Extension allows the HH-419 Bead Breaker to work on wheels up to 28″ in diameter. Expand the capabilities of your HH-419 Bead Breaker by adding this optional extension.
The TC-610 Bead Breaker is a hand tool for breaking the bead on ATV or rear farm tires. The TC-610 can be used with either a ratchet or impact wrench on both stiff and soft sidewall tires, eliminating the need for hammering. Made from heat-treated chrome-moly steel and all USA-built, the unique design pulls the bead from the rim, rather than the conventional push action.
The Cheetah® Magnum I Barrel is designed to increase the impact power of the CH-5 Cheetah® Bead Seater by 2 to 3 times over the standard barrel. The Cheetah® Magnum I Bar spreads the air discharge over a larger area to provide optimum air dispersion. The Cheetah® Magnum I Barrel is easy to install and installs in only minutes.
Our flexible air hose assembly is designed to give the Cheetah® Bead Seater operator the ability to manually control the air flow from the air compressor to the tire valve stem. The air hose assembly further assists the operator in reaching those difficult to reach valve stems.
The Cheetah® Magnum II Barrel is designed to increase the impact power of the CH-10 Cheetah® Bead Seater and CH-10AL Cheetah® Bead Seater by 2 to 3 times over the standard barrel. The Cheetah® Magnum II Barrel spreads the air dispersion over a greater area and provides optimum tire bead seating. The Cheetah® Magnum II Barrel is easy to install and installs in minutes.
The BS-07 Cheetah® Bead Seater makes seating the most difficult bead not only safe but simple, fast and economical. The BS-07 Cheetah® Bead Seater has an “End of Tank” discharge design, flared discharge barrel and a 2” discharge valve for maximum bead seating power. The BS-07 has a 5 Gallon capacity ASME certified steel tank.
The CH-10AL Cheetah® Bead Seater will seat the bead on all truck and small tractor tires. A 2″ tank opening allows use of the optional Magnum II barrel giving added “spread” of the discharge. This extends the power of the CH-10AL for seating even the most difficult beads on larger diameter wheels. The CH-10AL Cheetah® Bead Seater has a 10 gallon light- weight ASME certified aluminum tank.
Copyright © 2019 Big Red Trading Post. All Rights Reserved.