The 350B Back Buddy II™ will make brake jobs easier and more profitable. This versatile tool was designed to prevent injuries from awkward lifting and keep workers’ comp rates down. The Back Buddy II™ rolls under and bolts onto heavy drum and hub assembly, then handily rolls the assembly out and lays it over for servicing. Re-assembly is quick and precise because the Back Buddy II™ angles for perfect hub alignment, eliminating seal damage and costly fixes. The Back Buddy II™ handles all hub and drum assemblies with Universal Receiver and Adapter Sets. A simple change of adapters transforms the tool in seconds from inboard to outboard application.
*Adapters 6069 and 6073 10-hole inboard and outboard application are included
*Other wheel adapters sold separately.
The DG-20 Digital Tire Inflator represents one of the most accurate and easy to use digital tire inflators on the market today. Featuring a large, clear & easy to read digital display, with a back light feature, the DG-20 is designed and built for the toughest shop environments. The durable LCD display is protected by a large full body rubber shock boot which is included. The DG-20 is programmable to display in four units: PSI, BAR, KGF and KPA. The DG-20 services inflation ranges from 0-175 PSI with an accuracy of +/- 1% full scale. A simple inflate and/or deflate control allows for precise inflation control by the user. The DG-20 comes equipped with a 72” inflation hose assembly with a locking straight chuck.
The CH-22 Manual Tire Changer makes the job easy, fast and economical! No other manual changer works as well as the CH-22. Everything you need to change small tires comes with the CH-22 Manual Tire Changer. The CH-22 accommodates most wheels including open hub and bearing wheels. Also included is the patented CH-4 Mongoose Tire Tool! Don’t turn away any more small tire and wheel business add new business, new customers and more profit today!
Designed for Lawn & Garden and Motor Sport Wheels
The 1-PPK PakPress® Portable Wheel Stud Remover and Installer is a must if you’re in the Fleet Maintenance industry. Don’t be without this tool that brings the power of a 10-ton shop press right to the truck. Most impressive, the 1-PPK PakPress® lets you remove studs safely without damage. A two-hour job is done in twenty minutes, with no risk of damaging seals or bearings. Any mechanic can use it and get the job done right in minutes.
The TC-50 Tire Cutter is designed to cut passenger and light truck tires into 4 pieces at a rate of up to 60 tires per hour. The TC-50 is equipped with a 10 HP B&S commercial gas engine. The TC-50 Tire Cutter is perfect for tire shops who want to handle their own tire disposal. The patented shear blades works on a zero clearance design for a clean cut. This greatly extends the blade life compared to other designs. Two-handle valve system keeps operator’s hand away from the blades while cutting for added safety. The TC-50 Tire Cutter is easy to operate, low maintenance, dependable and designed for years of service. Small foot print allows this tire cutter to easily fit in any work area
The VV 3000 Versa Vac™ Radiator Pressure Tester and Coolant Dam will pay for itself after just a few uses. Ingenious and simple, this new time saving tool holds the engine coolant in, even when pipe plugs, sensors or valves are removed for replacement or repair. The Versa-Vac™ Pressure Tester creates a vacuum, holding coolant in with little or no loss. For many minor repairs, there is no need to spend valuable shop time draining and refilling the system. The Versa-Vac™ unit fits standard radiator necks and installs as quickly as a radiator cap. Adapters are available to fit special applications. As a pressure tester, the Versa-Vac™ allows a quick check of your repair with positive pressure from shop air. No tedious hand pumping. A radiator cap installs on the tester to provide pressure relief. An inlet ball valve adjusts the pressure applied to the system up to the maximum limit of the relief valve.
Air requirement for continuous use: approximately 30 CFM at 120-150 PSI.
*** ADAPTERS REQUIRED AND SOLD SEPARATELY ***
The 689900 Speedy Dayton Wheel Adapter allows easy mounting of 20” – 22.5” rims, cutting balancing time in half for most applications. This unit works for all models of truck computer wheel balancers. This unit doubles your production of demountable rim balancing. Lightweight and sturdy! Manufactured form heat-treated aluminum. Easy to mount! It mounts straight literally the first time. The Speedy works great on duplex rims (18″ x 22.5″ tires) for steering axles.
The TC-55 Tire Cutter is one of our most powerful passenger and light truck tire cutting units. Equipped with either a 18 HP Briggs and Stratton gas motor with electric start. The small footprint allows this workhorse to easily fit in any work area. The TC-55 Tire Cutter is faster than its little brother the TC-50 Tire Cutter, and can handle high volumes of passenger or light truck size tires quickly. Two-handle valve system keeps operator’s hand away from the blades while cutting for added safety. The TC-55 Tire Cutter is easy to operate, low maintenance, dependable and designed for years of service. The TC-55 will cut all passenger and light truck tires. Depending on the tire size the TC-55 is capable of quartering at a rate up to 90 per hour.
The Amermac Model 1100 Stripper Ring Lathe has the solution for Precision and Economics in Stripper Ring Turning for the steel industry. The Lathe was designed to take the grind out of the ring turning.
• Easy to use; grinding can be done in 15 minutes.
• Avoids knife mark claims.
• Compact design; Model 1100 can be used in area 5’ x 5’
• No special ventilation needed; Model 1100 doesn’t produce any smell or dust.
• Assembled and ready to use just plug it into a 110v – 115v outlet.
Copyright © 2019 Big Red Trading Post. All Rights Reserved.