The TC-100-14 optional tire compressor is designed for use on the TC-100 Tire Cutter. Designed to enhance performance the TC-100-14 will allow the TC-100 Tire Cutter the ability to cut up to 120 tires per hour.
The TC-50 Tire Cutter is designed to cut passenger and light truck tires into 4 pieces at a rate of up to 60 tires per hour. The TC-50 is equipped with a 10 HP B&S commercial gas engine. The TC-50 Tire Cutter is perfect for tire shops who want to handle their own tire disposal. The patented shear blades works on a zero clearance design for a clean cut. This greatly extends the blade life compared to other designs. Two-handle valve system keeps operator’s hand away from the blades while cutting for added safety. The TC-50 Tire Cutter is easy to operate, low maintenance, dependable and designed for years of service. Small foot print allows this tire cutter to easily fit in any work area
The 6346 Complete PakPress® Kit is a must if you’re in the Fleet Maintenance industry. Don’t be without this tool that brings the power of a 10-ton shop press right to the truck. Most impressive, the PakPress® lets you remove and install studs without removing the hub. A two-hour job is done in twenty minutes, with no risk of damaging seals or bearings.
The 6346 Complete PakPress® Kit includes:
The VV 3000 Versa Vac™ Radiator Pressure Tester and Coolant Dam will pay for itself after just a few uses. Ingenious and simple, this new time saving tool holds the engine coolant in, even when pipe plugs, sensors or valves are removed for replacement or repair. The Versa-Vac™ Pressure Tester creates a vacuum, holding coolant in with little or no loss. For many minor repairs, there is no need to spend valuable shop time draining and refilling the system. The Versa-Vac™ unit fits standard radiator necks and installs as quickly as a radiator cap. Adapters are available to fit special applications. As a pressure tester, the Versa-Vac™ allows a quick check of your repair with positive pressure from shop air. No tedious hand pumping. A radiator cap installs on the tester to provide pressure relief. An inlet ball valve adjusts the pressure applied to the system up to the maximum limit of the relief valve.
Air requirement for continuous use: approximately 30 CFM at 120-150 PSI.
*** ADAPTERS REQUIRED AND SOLD SEPARATELY ***
The CH-23 Tire Changing Stand includes a bead breaker for breaking the most difficult tire beads. The CH-23 Tire Changing Stand includes a leverage bar for the bead breaking attachment. This CH-23 is the perfect complement to the popular CH-22 Tire Changer. Mount either unit on top of this stand for a complete Tire Changing Station. Storage areas on the stand add convenience and the bead breaker feature allows for a one stop durable station.
Improving on a good thing just got a whole lot easier. The CH-22 ACC accessories kit is designed to enhance the speed and capabilities of the CH-22 Multi Tire Changer. No other manual tire changer on the market has the versatility and capabilities as the CH-22 Multi Tire Changer.
This package includes the following items:
The TC-50 Tire Cutter is designed to cut passenger and light truck tires into 4 pieces at a rate of up to 60 tires per hour. The TC-50 is equipped with a 3HP, 220 single phase electric motor. The TC-50 Tire Cutter is perfect for tire shops who want to handle their own tire disposal. The patented shear blades works on a zero clearance design for a clean cut. This greatly extends the blade life compared to other designs. Two-handle valve system keeps operator’s hand away from the blades while cutting for added safety. The TC-50 Tire Cutter is easy to operate, low maintenance, dependable and designed for years of service. Small foot print allows this tire cutter to easily fit in any work area.
***THIS UNIT IS CE FOR THE EUROPEAN MARKET***
Please call to order or for shipping weight at 1-800-223-4540
The CH-22 Manual Tire Changer makes the job easy, fast and economical! No other manual changer works as well as the CH-22. Everything you need to change small tires comes with the CH-22 Manual Tire Changer. The CH-22 accommodates most wheels including open hub and bearing wheels. Also included is the patented CH-4 Mongoose Tire Tool! Don’t turn away any more small tire and wheel business add new business, new customers and more profit today!
Designed for Lawn & Garden and Motor Sport Wheels
The 350B Back Buddy II™ will make brake jobs easier and more profitable. This versatile tool was designed to prevent injuries from awkward lifting and keep workers’ comp rates down. The Back Buddy II™ rolls under and bolts onto heavy drum and hub assembly, then handily rolls the assembly out and lays it over for servicing. Re-assembly is quick and precise because the Back Buddy II™ angles for perfect hub alignment, eliminating seal damage and costly fixes. The Back Buddy II™ handles all hub and drum assemblies with Universal Receiver and Adapter Sets. A simple change of adapters transforms the tool in seconds from inboard to outboard application.
*Adapters 6069 and 6073 10-hole inboard and outboard application are included
*Other wheel adapters sold separately.
The Amermac Model 1100 Stripper Ring Lathe has the solution for Precision and Economics in Stripper Ring Turning for the steel industry. The Lathe was designed to take the grind out of the ring turning.
• Easy to use; grinding can be done in 15 minutes.
• Avoids knife mark claims.
• Compact design; Model 1100 can be used in area 5’ x 5’
• No special ventilation needed; Model 1100 doesn’t produce any smell or dust.
• Assembled and ready to use just plug it into a 110v – 115v outlet.
Copyright © 2019 Big Red Trading Post. All Rights Reserved.