The Amermac Model 1100 Stripper Ring Lathe has the solution for Precision and Economics in Stripper Ring Turning for the steel industry. The Lathe was designed to take the grind out of the ring turning.
• Easy to use; grinding can be done in 15 minutes.
• Avoids knife mark claims.
• Compact design; Model 1100 can be used in area 5’ x 5’
• No special ventilation needed; Model 1100 doesn’t produce any smell or dust.
• Assembled and ready to use just plug it into a 110v – 115v outlet.
The Amermac 525 Low Profile Spinner allows for easy access under lower body style cars and trucks. Completely portable this heavy duty spinner will handle passenger cars all the way upto heavy duty truck applications, including rear wheels and drive duals. The 525 Low Profile Spinner is available in 5 HP, 220V, Single Phase.
The HD-22 Clever Lever® puts science back in this chore by providing just the right tool to remove and replace tires easily and safely. The Clever Lever® allows one person to easily move tires up to 300 lbs., helping to prevent back injuries and other costly insurance claims. Simply roll the Clever Lever® under the tire, then lift and pull. To replace a tire, simply push it back in, rotate and tilt for quick alignment with the studs. The Clever Lever® comes in two models that fit everything from light/medium duty pickups to heavy-duty tractors and trailers. The HD-22 Clever Lever® fits tires from 24″ to 36 “.
For larger tires the HD-26 Clever Lever® is available and fits tires 36″ to 48″.
The S-25 Wheel Dolly can help you lift and transport heavy truck and off highway equipment wheels faster and easier than ever. The S-25 Wheel Dolly will help reduce the high cost of equipment downtime by speeding up the wheel handling process . The S-25 Wheel Dolly can easily handle loads up to 2500 lbs and tires up to 60″ in diameter. Speed up fleet maintenance and reduce the risk of damage to grease retainers and bearings when mounting or dismounting the wheel! The large 5” swivel guide and carrier wheels with rubber tires make for easy maneuverability of the S-25 Wheel Dolly. The S-25 Wheel Dolly allows you to quickly align wheels to axle with the specially designed 3” leveling adjustment screw and 5” vertical bar.
The TW2000 Tweel Handler™ is an amazingly versatile tool that allows truck mechanics to remove, install, rotate and transport single tire-and-wheel assemblies with ease. The vertical range of conventional wheel dollies is 3″ or 4″, forcing you to kneel down to inspect tires, or use a floor jack to raise the tire up. The TW2000 solution is a built-in ratcheting jack with 14″ of vertical travel. No more bending over! The Tweel Handler’s U-shaped chassis allows you to get close to the work area, with unhindered access to the tire in the cradle. No restraining chains are required, yet the Tweel Handler™ holds virtually any single truck wheel, including wide-based singles. Three heavy-duty ball-bearing wheels mounted under ball-bearing swivel casters make it highly maneuverable.
Minimum Tire/Wheel Diameter: 23.5″
Maximum Tire/Wheel Weight: 350 lbs
Cradle Depth: 14″
Cradle Width: 23.5″
Supporting Ring Roller Spread: 37″
Vertical Hoist Travel: 14″
The TC-50 Tire Cutter is designed to cut passenger and light truck tires into 4 pieces at a rate of up to 60 tires per hour. The TC-50 is equipped with a 3HP, 220 single phase electric motor. The TC-50 Tire Cutter is perfect for tire shops who want to handle their own tire disposal. The patented shear blades works on a zero clearance design for a clean cut. This greatly extends the blade life compared to other designs. Two-handle valve system keeps operator’s hand away from the blades while cutting for added safety. The TC-50 Tire Cutter is easy to operate, low maintenance, dependable and designed for years of service. Small foot print allows this tire cutter to easily fit in any work area.
***THIS UNIT IS CE FOR THE EUROPEAN MARKET***
Please call to order or for shipping weight at 1-800-223-4540
The CH-23 Tire Changing Stand includes a bead breaker for breaking the most difficult tire beads. The CH-23 Tire Changing Stand includes a leverage bar for the bead breaking attachment. This CH-23 is the perfect complement to the popular CH-22 Tire Changer. Mount either unit on top of this stand for a complete Tire Changing Station. Storage areas on the stand add convenience and the bead breaker feature allows for a one stop durable station.
The CH-22 Manual Tire Changer makes the job easy, fast and economical! No other manual changer works as well as the CH-22. Everything you need to change small tires comes with the CH-22 Manual Tire Changer. The CH-22 accommodates most wheels including open hub and bearing wheels. Also included is the patented CH-4 Mongoose Tire Tool! Don’t turn away any more small tire and wheel business add new business, new customers and more profit today!
Designed for Lawn & Garden and Motor Sport Wheels
Copyright © 2019 Big Red Trading Post. All Rights Reserved.