TC-710 EP Recycling Baler (Electric Power)

The 6247 PakPress® Cart makes easy job with 1PPK PakPress® even easier and safer.There are many benefits and features to the operator when using the optional work station storage cart

The 6346 Complete PakPress® Kit is a must if you’re in the Fleet Maintenance industry.  Don’t be without this tool that brings the power of a 10-ton shop press right to the truck.  Most impressive, the PakPress® lets you remove and install studs without removing the hub. A two-hour job is done in twenty minutes, with no risk of damaging seals or bearings.

The 6346 Complete PakPress® Kit includes:

• 1-PPK PakPress®
• 6247 PakPress® Cart
• Adapters ( 6261,6235, 6236, 6361)

The innovative SC-99 Striver Tool™ seal and bushing driver makes S-camshaft maintenance quick and easy. Now there is no need to remove the hub in order to extract the S-camshaft. Installation of the new bushing and seal is simple and precise. The Striver Tool™ seal and bushing driver eliminates the risk of seal damage. The technician simply taps his hammer on the Striver Tool™ not the seal, when installing the new seal and bushings.

• Fits S-camshaft diameters 1 1/4″ to 1 5/8″
• Eliminates seal damage during installation
• Remove or install seals and bushing in seconds

The TW2000 Tweel Handler™ is an amazingly versatile tool that allows truck mechanics to remove, install, rotate and transport single tire-and-wheel assemblies with ease. The vertical range of conventional wheel dollies is 3″ or 4″, forcing you to kneel down to inspect tires, or use a floor jack to raise the tire up. The TW2000 solution is a built-in ratcheting jack with 14″ of vertical travel. No more bending over! The Tweel Handler’s U-shaped chassis allows you to get close to the work area, with unhindered access to the tire in the cradle. No restraining chains are required, yet the Tweel Handler™ holds virtually any single truck wheel, including wide-based singles. Three heavy-duty ball-bearing wheels mounted under ball-bearing swivel casters make it highly maneuverable.

Minimum Tire/Wheel Diameter:  23.5″
Maximum Tire/Wheel Weight:  350 lbs
Cradle Depth:  14″
Cradle Width:  23.5″
Supporting Ring Roller Spread:  37″
Vertical Hoist Travel:  14″

Replacement frame with cylinder and adapters
(does not include hoses or pump)

The 350B Back Buddy II™ will make brake jobs easier and more profitable. This versatile tool was designed to prevent injuries from awkward lifting and keep workers’ comp rates down. The Back Buddy II™ rolls under and bolts onto heavy drum and hub assembly, then handily rolls the assembly out and lays it over for servicing. Re-assembly is quick and precise because the Back Buddy II™ angles for perfect hub alignment, eliminating seal damage and costly fixes. The Back Buddy II™ handles all hub and drum assemblies with Universal Receiver and Adapter Sets. A simple change of adapters transforms the tool in seconds from inboard to outboard application.

*Adapters 6069 and 6073 10-hole inboard and outboard application are included
*Other wheel adapters sold separately.