$124.20
The TI-88 Wheel Weight Holder is a convenient shelf mount that is the ideal place for wheel weights. Keep it next to your tire changer for quick access.
The TI-88 Wheel Weight Holder is a convenient shelf mount that is the ideal place for wheel weights. Keep it next to your tire changer for quick access.
| Weight | 8 oz |
|---|
The HD-22 Clever Lever® puts science back in this chore by providing just the right tool to remove and replace tires easily and safely. The Clever Lever® allows one person to easily move tires up to 300 lbs., helping to prevent back injuries and other costly insurance claims. Simply roll the Clever Lever® under the tire, then lift and pull. To replace a tire, simply push it back in, rotate and tilt for quick alignment with the studs. The Clever Lever® comes in two models that fit everything from light/medium duty pickups to heavy-duty tractors and trailers. The HD-22 Clever Lever® fits tires from 24″ to 36 “.
For larger tires the HD-26 Clever Lever® is available and fits tires 36″ to 48″.
Actual Weight
19 lbs
Shipping Weight
31 lbs
The HD-26 Clever Lever® puts science back in this chore by providing just the right tool to remove and replace tires easily and safely. The Clever Lever® allows one person to readily move tires up to 300 lbs., helping to prevent back injuries and other costly insurance claims. Simply roll the Clever Lever® under the tire, then lift and pull. To replace a tire, simply push it back in, rotate and tilt for quick alignment with the studs. The HD-26 Clever Lever fits tires from 36″ to 48″. The Clever Lever® comes in two models that fit everything from light/medium duty pickups to heavy-duty tractors and trailers.
Actual Weight
20 lbs
Shipping Weight
31 lbs
The VV 3000 Versa Vac™ Radiator Pressure Tester and Coolant Dam will pay for itself after just a few uses. Ingenious and simple, this new time saving tool holds the engine coolant in, even when pipe plugs, sensors or valves are removed for replacement or repair. The Versa-Vac™ Pressure Tester creates a vacuum, holding coolant in with little or no loss. For many minor repairs, there is no need to spend valuable shop time draining and refilling the system. The Versa-Vac™ unit fits standard radiator necks and installs as quickly as a radiator cap. Adapters are available to fit special applications. As a pressure tester, the Versa-Vac™ allows a quick check of your repair with positive pressure from shop air. No tedious hand pumping. A radiator cap installs on the tester to provide pressure relief. An inlet ball valve adjusts the pressure applied to the system up to the maximum limit of the relief valve.
Air requirement for continuous use: approximately 30 CFM at 120-150 PSI.
*** ADAPTERS REQUIRED AND SOLD SEPARATELY ***
The TW2000 Tweel Handler™ is an amazingly versatile tool that allows truck mechanics to remove, install, rotate and transport single tire-and-wheel assemblies with ease. The vertical range of conventional wheel dollies is 3″ or 4″, forcing you to kneel down to inspect tires, or use a floor jack to raise the tire up. The TW2000 solution is a built-in ratcheting jack with 14″ of vertical travel. No more bending over! The Tweel Handler’s U-shaped chassis allows you to get close to the work area, with unhindered access to the tire in the cradle. No restraining chains are required, yet the Tweel Handler™ holds virtually any single truck wheel, including wide-based singles. Three heavy-duty ball-bearing wheels mounted under ball-bearing swivel casters make it highly maneuverable.
Minimum Tire/Wheel Diameter: 23.5″
Maximum Tire/Wheel Weight: 350 lbs
Cradle Depth: 14″
Cradle Width: 23.5″
Supporting Ring Roller Spread: 37″
Vertical Hoist Travel: 14″
The CH-22 Manual Tire Changer makes the job easy, fast and economical! No other manual changer works as well as the CH-22. Everything you need to change small tires comes with the CH-22 Manual Tire Changer. The CH-22 accommodates most wheels including open hub and bearing wheels. Also included is the patented CH-4 Mongoose Tire Tool! Don’t turn away any more small tire and wheel business add new business, new customers and more profit today!
Designed for Lawn & Garden and Motor Sport Wheels
The S-24 Tire Cart is perfect for quick and safe around the shop transport of most passenger and light truck tire & wheel. The heavy duty casters allow for easy lifting and maneuverability. Mounting a tire is simple and fast. Inner rollers on the S-24 Tire Cart allow the tire & wheel to spin freely, for fast and easy wheel stud alignment. Completely adjustable the S-24 handles just about any size tire and wheel combination up to 200 lbs. Stop moving heavy tires the hard way and reduce your risk of injury by using the S-24 Tire Cart.
Quickly and safely bring a total assortment of wheel weights from storage to the balancer with the WC-8 wheel weight cart. Save time, money and back injuries! Six sturdy shelves easily support 1800 lbs of wheel weights. Each shelf holds 5, 8″ square wheel weight boxes, 25 in all! The two center casters on the WC-8 are taller than the four outside casters creating a pivot point so the WC-8 can be turned and moved in and out of tight sharp areas with little effort.
The 689900 Speedy Dayton Wheel Adapter allows easy mounting of 20” – 22.5” rims, cutting balancing time in half for most applications. This unit works for all models of truck computer wheel balancers. This unit doubles your production of demountable rim balancing. Lightweight and sturdy! Manufactured form heat-treated aluminum. Easy to mount! It mounts straight literally the first time. The Speedy works great on duplex rims (18″ x 22.5″ tires) for steering axles.
The CH-4 M Mini Mongoose Kit is a smaller version of the standard Mongoose tire tool. This precise smaller version allows for easy mounting and demounting of smaller tube type and tubeless tires such as a 4″ rim diameter wheel. Also included in th kit is a smaller center post for use on the CH-22 Manual Tire Changer. The smaller center post allows you to mount and dismount small bearing type wheels without actually having to clamp them into the jaws of the CH-22.
The 6346 Complete PakPress® Kit is a must if you’re in the Fleet Maintenance industry. Don’t be without this tool that brings the power of a 10-ton shop press right to the truck. Most impressive, the PakPress® lets you remove and install studs without removing the hub. A two-hour job is done in twenty minutes, with no risk of damaging seals or bearings.
The 6346 Complete PakPress® Kit includes:
We are a team of designers and developers that create high quality WordPress, Magento, Prestashop, Opencart themes.
