The S-1400M Truck Frame Lift air jack is engineered just like its little brother, the S-1400 except it has a 60″ between the air cylinder and lift pads allows you to reach further under a frame, the safest way! Anywhere an air hose can reach you have a low cost lifting system with one man portability. The two large center wheels provide easy maneuverability for quick positioning. Trigger the dual action valve to raise or lower up to 7 tons of equipment.
Maximum lift height 44″
Minimum height 11.5″
Max width between saddles is 60″
The Cheetah® Tire Wedge is designed to help place the lower sidewall of the tire in an optimal seating position. The tire wedge is highly effective and recommended when seating soft sidewall off highway tires.
The CH-03 Cheetah® Safety Cage Bead Seater simply bolts to a tire safety cage using the fully adjustable brackets. The CH-03 seats the bead on difficult tires located in the safety cage (not included) faster and safer than any other system on the market. The CH-03 is universal and can accommodate virtually any size tire that is normally inflated in a safety cage.
6′ x 1 1/2″ inflation hose
*Does not include the safety cage or discharge tank
The CH-5 Cheetah® Bead Seater makes seating the most difficult bead not only safe but simple, fast and economical. Designed for commercial use on all tires from small 4″ to 24.5″ truck tires. A 1 1/2″ tank opening allows use of the optional Magnum I barrel giving added “spread” of the discharge. A simple charge of the tank is all it takes to seat the most difficult tire beads. The CH-5 Cheetah® Bead Seater has a 5 gallon ASME certified steel tank.
The HH-419E Bead Breaker Extension is an option for the HH-419 Bead Breaker. The HH-419E Bead Breaker Extension allows the HH-419 Bead Breaker to work on wheels up to 28″ in diameter. Expand the capabilities of your HH-419 Bead Breaker by adding this optional extension.
The CH-13AL Cheetah® Magnum Bead Seater is the most effective way to seat the beads on wheel sizes 24″ to 54″. Used properly the CH-13AL Cheetah® Bead Seater will seat the bead on virtually all tractor and heavy equipment tires. The CH-13AL works on both vertical and horizontal applications and can be used in the field where the tires remain mounted to the equipment. Made with a 13 gallon ASME certified aluminum tank the CH-13AL Cheetah® Bead Seater has a 50% weight savings when compared to a traditional steel tank.
The CHR-1 Cheetah® Safety-Flate was developed for fleet service application. The CHR-1 eliminates guesswork by using a 3/8″ high volume, high flow regulator which quickly and accurately inflates up to four tires at the same time. The pre-set inflation gauge and regulator assembly maintain safety and precision. The CHR-1 is equipped with special couplers and (4) 25′ hoses. Constructed of high strength steel, yet lightweight and compact, the CHR-1 is built for heavy shop use and years of dependable service.
Our most economical filter crusher, the TC-6 Oil Filter Crusher is perfect for small repair and lube shop use. Faster than air operated crushers, the electric/hydraulic system crushes smoothly without that “air slamming” created by air operated units. The TC-6 Oil Filter Crusher unit will crush all passenger car/light truck oil filters in a 5”x 9” crush chamber and can be wall-mounted or used with the optional stand 5591. Optional stand fits over standard 55 gallon barrel. The TC-6 Oil Filter Crusher is available in both 110V or 220V models.
The CH-5AL Cheetah® Bead Seater makes seating the most difficult tire beads not only safe but simple, fast and economical. The CH-5AL is designed for commercial use on all tires from small to 24.5″ truck tires. The CH-5AL Cheetah® Bead Seater has a 5 gallon ASME certified aluminum tank. For larger tires check into the CH-10 and CH-13AL Cheetah® Bead Seaters.
Copyright © 2019 Big Red Trading Post. All Rights Reserved.